Paradise Valley Legistar Banner
Share to Facebook Share to Twitter Bookmark and Share
File #: 20-352    Version: 1 Name:
Type: Hillside Status: Agenda Ready
File created: 9/4/2020 In control: Hillside Building Committee
On agenda: 9/9/2020 Final action:
Title: Re-approval review for a new single family residence at 4606 E Charles Drive (APN 168-69-022).
Attachments: 1. Hillside Map.pdf, 2. Vicinity Map.pdf, 3. Aerial.pdf, 4. Application.pdf, 5. Notification Materials.pdf, 6. Plans.pdf, 7. Material Board.pdf
To:
Hillside Building Committee


From:
Hugo Vasquez; Hillside Development Administrator


Date:
September 9th, 2019


Subject:
Re-approval review for a new single family residence at 4606 E Charles Drive (APN 168-69-022).


Narrative:
The proposed project shall construct a new single family residence, pool, and retaining walls. The project has an application date of August 17th, 2020 and will be reviewed under the 2018 Hillside Development Regulations. The project was previous approved on February 15th, 2019 but the application recently expired.

Lot Data
1.
Area of Lot
0.952 ac or 41,453 ft?
2.
Area Under Roof
8,586 ft?
3.
Floor Area Ratio
20.71%
4.
Building Site Slope
6.00%
5.
Allowable Disturbed Area
24,872 ft? (60.00%)
6.
Existing Disturbed Area
39,100 ft? (94.32%)
7.
Proposed Disturbed Area
33,724 ft? (81.35%)
8.
Maximum Building Height
19 ft - 0 in
9.
Overall Height
28 ft - 6 in
10.
Volume of Cut/Fill
2,000 yd?
11.
Hillside Assurance
$68,145

Background
The property previously contained a 2,600 ft2 residential property with an attached carport constructed in 1960. The structure was demolished in 2019.

New Single Family Residence
The proposed project shall construct a new single-story residence with approximately 5,000 ft2 of livable area. Existing disturbed areas are also proposed to be revegetated to blend in with the natural desert.

Pool
A pool and water feature are proposed in the north side of the property. A tall water feature (accessory structure) is proposed at the end of the pool.

Materials
Proposed exterior finishes are stucco and block with natural earth tones. Pavers and tiles are proposed for the hardscape surfaces (driveway, walkways) and the water feature. The provided dark gray paver (LRV 12), light gray paver (LRV 25), and "silver" tile (LRV 35) samples meet Hillside requirements. Stucco walls shall be painted tan (Dunn-Edwards, Ash Gray, DEC 751, LRV 35). CMU walls, veneers, and a water feature shall consist of gray blocks (...

Click here for full text